Micro Detectors
Micro Detectors FS1/0P-E Photoelectric Sensor
Product Code:FS1/0P-E
Description
Detection propertiesNominal detection distance
See table
of optical fibers
Sensitivity adjustment1-turn trimmerOutputsType of outputPNPExit functionLO / DOSwitching frequency1 kHzElectrical dataSupply voltage10 ... 30VdcVacuum absorption100 mALoad current30 mAOutput voltage drop1.2 V maxMaximum residual ripple? 10%LED indicatorsRed (NO output in
activated state)
Delay in availability200 msShort circuit protectionYesReverse polarity protectionYesIssuanceRed LedImmunity to ambient light30.000lux
(incandescent lamp),
10.000lux (sunlight)
Mechanical datadimensions15x26x67 mmWeight50 gBody materialPolyamideConnectionsM12
connector - 90 ° output
Active part materialDepending on the
optical fibers
Operating temperature- 25 ° C ... + 70 ° C
(without condensation)
Testing / CertificationsCertificationsTHERE ISDegree of protectionIP67Technical Specifications
Detection properties
| Nominal detection distance | See table of optical fibers | |
| Sensitivity adjustment | 1-turn trimmer | |
Outputs
| Type of output | PNP | |
| Exit function | LO / DO | |
| Switching frequency | 1 kHz | |
Electrical data
| Supply voltage | 10 ... 30Vdc | |
| Vacuum absorption | 100 mA | |
| Load current | 30 mA | |
| Output voltage drop | 1.2 V max | |
| Maximum residual ripple | ? 10% | |
| LED indicators | Red (NO output in activated state) | |
| Delay in availability | 200 ms | |
| Short circuit protection | Yes | |
| Reverse polarity protection | Yes | |
| Issuance | Red Led | |
| Immunity to ambient light | 30.000lux (incandescent lamp), 10.000lux (sunlight) | |
Mechanical data
| dimensions | 15x26x67 mm | |
| Weight | 50 g | |
| Body material | Polyamide | |
| Connections | M12 connector - 90 ° output | |
| Active part material | Depending on the optical fibers | |
| Operating temperature | - 25 ° C ... + 70 ° C (without condensation) | |
Testing / Certifications
| Certifications | THERE IS | |
| Degree of protection | IP67 | |