自2001年起提供工业备件与工程解决方案。
德国仓直发，全球快速配送
多种支付方式多种付款选项
Ropex RES-5027 Temperature Controller
产品描述
Ropex的产品（包括Ropex RES-5027 Temperature Controller）通过平行进口渠道采购，并快速可靠地交付给United States的客户。Imtek Engineering以具有竞争力的价格提供正品Ropex零部件。即使Ropex RES-5027 Temperature Controller未在我们的网站上列出，您也可以随时申请报价——我们的团队将迅速响应并为您提供专属报价。
United StatesTemperature Controller
Technical data
10
Technical data
Design
Housing for electrical cabinet mounting On TS35 top hat rail (35 mm) in accordance with DIN EN 50022 latchable
Basic surface: 90 x 75 mm; depth: 135 mm (incl. connection terminals)
Network voltage
110 VAC -15%…300 VAC +10% Connected between neutral and an outside conductor
or 110 VAC -15%…480 VAC +10% Connected between two outside conductors
!
Power supply network
The voltage between outside conductor and earth must not exceed 300 VAC.
Symmetrical TN- or TT-network Overvoltage category III
!
Operation in voltage-free network (eg IT network) only after checking with ROPEX.
Network frequency
47…63 Hz, automatic frequency adjustment in this range
Current consumption (Primary current of the impulse transformer)
Imax = 5 A (ED = 100%) Imax = 25 A (ED = 20%, duration of play 1 min)
24 VDC supply Terminals 12+13
24 VDC, Imax = 1.0 A, protected against faulty polarisation Tolerance: ±10%
SELV or PELV supplied from maximum 300 VAC, Cat II
Measurement range
Secondary voltage UR:
0.4…120 VAC Secondary current IR:
30…500 A (transformer PEX-W4/-W5) ROPEX application report
Heating element type and temperature range
Besides setting through the rotary encoder switch (see below), the setting for the
temperature range and temperature coefficient can be performed through the
ROPEX visualisation software ( section 8.17 "USB interface for visualisation
software ROPEXvisual®" on page 35):
Temperature range:
200 °C, 300 °C, 400 °C or 500 °C Temperature coefficient: 400…4000 ppm/K (variable setting range)
Five areas can be set on the device through rotary encoder switches:
Temperature coefficient 1100 ppm/K, 0…300 °C (e.g. alloy A20) Temperature coefficient 780 ppm/K, 0…300 °C (e.g. alloy L)
Temperature coefficient 1100 ppm/K, 0…500 °C (e.g. alloy A20) Temperature coefficient 780 ppm/K, 0…500 °C (e.g. alloy L)
Temperature coefficient 3500 ppm/K, 0…300 °C (e.g. LEX3500) Standard value 300 °C, alloy A20
Analogue input (Setpoint) Terminal 16+13
Page 44
0…10 VDC, Imax = 5 mA, electrically separated from the heating circuit corresponding to 0…300 °C or 0…500 °C
or through an external precision potentiometer PD-3 or PD-5 (R = 2 kOhm)
0…2 kOhm corresponding to 0…300 °C or 0…500 °C
RES-5027
Version 2
10
Technical data
Design
Housing for electrical cabinet mounting On TS35 top hat rail (35 mm) in accordance with DIN EN 50022 latchable
Basic surface: 90 x 75 mm; depth: 135 mm (incl. connection terminals)
Network voltage
110 VAC -15%…300 VAC +10% Connected between neutral and an outside conductor
or 110 VAC -15%…480 VAC +10% Connected between two outside conductors
!
Power supply network
The voltage between outside conductor and earth must not exceed 300 VAC.
Symmetrical TN- or TT-network Overvoltage category III
!
Operation in voltage-free network (eg IT network) only after checking with ROPEX.
Network frequency
47…63 Hz, automatic frequency adjustment in this range
Current consumption (Primary current of the impulse transformer)
Imax = 5 A (ED = 100%) Imax = 25 A (ED = 20%, duration of play 1 min)
24 VDC supply Terminals 12+13
24 VDC, Imax = 1.0 A, protected against faulty polarisation Tolerance: ±10%
SELV or PELV supplied from maximum 300 VAC, Cat II
Measurement range
Secondary voltage UR:
0.4…120 VAC Secondary current IR:
30…500 A (transformer PEX-W4/-W5) ROPEX application report
Heating element type and temperature range
Besides setting through the rotary encoder switch (see below), the setting for the
temperature range and temperature coefficient can be performed through the
ROPEX visualisation software ( section 8.17 "USB interface for visualisation
software ROPEXvisual®" on page 35):
Temperature range:
200 °C, 300 °C, 400 °C or 500 °C Temperature coefficient: 400…4000 ppm/K (variable setting range)
Five areas can be set on the device through rotary encoder switches:
Temperature coefficient 1100 ppm/K, 0…300 °C (e.g. alloy A20) Temperature coefficient 780 ppm/K, 0…300 °C (e.g. alloy L)
Temperature coefficient 1100 ppm/K, 0…500 °C (e.g. alloy A20) Temperature coefficient 780 ppm/K, 0…500 °C (e.g. alloy L)
Temperature coefficient 3500 ppm/K, 0…300 °C (e.g. LEX3500) Standard value 300 °C, alloy A20
Analogue input (Setpoint) Terminal 16+13
Page 44
0…10 VDC, Imax = 5 mA, electrically separated from the heating circuit corresponding to 0…300 °C or 0…500 °C
or through an external precision potentiometer PD-3 or PD-5 (R = 2 kOhm)
0…2 kOhm corresponding to 0…300 °C or 0…500 °C
RES-5027
Version 2
常见问题
关于Ropex品牌Ropex RES-5027 Temperature Controller产品的常见问题。Imtek Engineering随时准备帮助您在United States采购Ropex的Ropex RES-5027 Temperature Controller。
Imtek Engineering通过可信赖的供应渠道采购正品Ropex产品，并以具有竞争力的价格向United States客户提供。
