SICK 1037905 DFS60B-BEEK01024 Incremental encoder

PERFORMANCEPulses per revolution1,024Measuring step90° electronically/pprMeasuring step deviation at binary number of lines± 0.008°Error limits± 0.05°Initialization time40 msINTERFACESCommunication interfaceIncrementalCommunication Interface detailHTL / Push pullNumber of signal channels6-channelELECTRICAL DATAConnection typeCable, 8-wire, universal, 1.5 mOperating current40 mAPower consumption≤ 0.5 W (without load)Supply voltage10 ... 32 VLoad current≤ 30 mAOutput frequency≤ 600 kHzReference signal, number1Reference signal, position90°, electric, logically gated with A and BReverse polarity protection✔Short-circuit protection of the outputs✔ 1)MTTFd: mean time to dangerous failure300 years (EN ISO 13849-1) 2)1) Short-circuit opposite to another channel, US or GND permissable for maximum 30 s.2) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.MECHANICAL DATAMechanical designBlind hollow shaftShaft diameter12 mmWeight0.2 kgShaft materialMetalFlange materialAluminumHousing materialAluminum die castStart up torque0.8 Ncm (+20 °C)Operating torque0.6 Ncm (+20 °C)Permissible shaft movement, axial static/dynamic± 0.5 mm / ± 0.2 mmPermissible shaft movement, radial static/dynamic± 0.3 mm / ± 0.1 mmOperating speed≤ 6,000 min⁻¹ 1)Moment of inertia of the rotor40 gcm²Bearing lifetime3.6 x 10^10 revolutionsAngular acceleration≤ 500,000 rad/s²1) Allow for self-heating of 3.3 K per 1,000 rpm when designing the operating temperature range.AMBIENT DATAEMCAccording to EN 61000-6-2 and EN 61000-6-3Enclosure rating

IP67, housing side, cable connection (according to IEC 60529)

IP65, shaft side (according to IEC 60529)

Permissible relative humidity90 % (condensation of the optical scanning not permitted)Operating temperature range

–40 °C ... +100 °C 1)

–30 °C ... +100 °C 2)

Storage temperature range–40 °C ... +100 °C, without packageResistance to shocks70 g, 6 ms (according to EN 60068-2-27)Resistance to vibration30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)1) Stationary position of the cable.2) Flexible position of the cable.

暂时没有通用描述。