自2001年起提供工业备件与工程解决方案。
德国仓直发，全球快速配送
多种支付方式多种付款选项
Valco FCM Flow Switch
产品描述
Valco的产品（包括Valco FCM Flow Switch）通过平行进口渠道采购，并快速可靠地交付给United States的客户。Imtek Engineering以具有竞争力的价格提供正品Valco零部件。即使Valco FCM Flow Switch未在我们的网站上列出，您也可以随时申请报价——我们的团队将迅速响应并为您提供专属报价。
United StatesFlow Switch
FLOW
FCM
Flow switch
GENERAL CHARACTERISTICS The flow switch FCM was built to enable a simple control of the flow
rate and a fast signal in the absence of flow.
The electrical part is physically separate from the mechanical and the contact is magnetically actuated. The electric head has a
bayonet fixing system and, in case of necessity, can be replaced without removing the instrument from its installation.
● ● ● ● ●
No calibration needed.
Easy replacement of the electrical contact.
Low pressure loss.
Versions for both vertical and horizontal operation.
Can be used both with liquids and gases.
GV
Vertical mounting with flow direction from bottom to top.
GO
Horizontal or vertical mounting with flow direction from bottom to top
TECHNICAL DATA
Tab.1
Body Process connection Sensor Accuracy Max. Temperature Pressure loss Max. Flow rate
Max. pressure
Hexagonal bar Brass ½’’ Gas-M - UNI 228/1 Piston PP ± 15% of setting value
90°C 0,5 bar with max. flow rate 25 l/min All ranges 250 bar (*) Vertical
Horizontal 170 g
Mounting Weight
DIMENSIONS
mm.
Code 15 GV GO -
(*) Higher pressures on request.
AVAILABLE SETTINGS GV Settings l/min Nominal ON 0,8 0,8 1 1,1 1,5 1,7 2 2,1
2,5 2,6 3 3,2
Tab.2 GO Settings l/min Nominal ON 2,5 2,8 3 3,3 4 4,2 5 5,2 6 6,3 7 7,4
OFF 0,7 1 1,6 2 2,4 3,1
OFF 1,7 2 2,9 3,2 4,1 4,4
ELECTRICAL DATA Reed contact Reed contact data Connection
N.
6 5 1 2 3 4
Tab.3 N.O.
300 Vac Faston
No flow rate 70 VA 0,5 A 6,3 mm.
DIN plug protection IP65 On request The DIN cap is supplied in a separate kit
KIT
INSTALLATION AND MAINTENANCE Drain the hydraulic circuit before installation. Do not mount the
switch in direct contact with ferromagnetic surfaces.
Proceed with the assembly, taking care to use only a hexagonal wrench for fixing metal fittings.
In case of electrical failure replace the electrical head making sure of the happened hooking bayonet.
NOMENCLATURE
FCM 3 ●
2,5
15 GV
● ● KIT/FCM We reserve the right to change the data without notice
Tab.2 Tab.2 Tab.1 Tab.3
Name + N. of setting Nominal setting l/min Process connection + Type of installation
DIN cap optional mounting kit BE#040/8-03/2010
153
FCM
Flow switch
GENERAL CHARACTERISTICS The flow switch FCM was built to enable a simple control of the flow
rate and a fast signal in the absence of flow.
The electrical part is physically separate from the mechanical and the contact is magnetically actuated. The electric head has a
bayonet fixing system and, in case of necessity, can be replaced without removing the instrument from its installation.
● ● ● ● ●
No calibration needed.
Easy replacement of the electrical contact.
Low pressure loss.
Versions for both vertical and horizontal operation.
Can be used both with liquids and gases.
GV
Vertical mounting with flow direction from bottom to top.
GO
Horizontal or vertical mounting with flow direction from bottom to top
TECHNICAL DATA
Tab.1
Body Process connection Sensor Accuracy Max. Temperature Pressure loss Max. Flow rate
Max. pressure
Hexagonal bar Brass ½’’ Gas-M - UNI 228/1 Piston PP ± 15% of setting value
90°C 0,5 bar with max. flow rate 25 l/min All ranges 250 bar (*) Vertical
Horizontal 170 g
Mounting Weight
DIMENSIONS
mm.
Code 15 GV GO -
(*) Higher pressures on request.
AVAILABLE SETTINGS GV Settings l/min Nominal ON 0,8 0,8 1 1,1 1,5 1,7 2 2,1
2,5 2,6 3 3,2
Tab.2 GO Settings l/min Nominal ON 2,5 2,8 3 3,3 4 4,2 5 5,2 6 6,3 7 7,4
OFF 0,7 1 1,6 2 2,4 3,1
OFF 1,7 2 2,9 3,2 4,1 4,4
ELECTRICAL DATA Reed contact Reed contact data Connection
N.
6 5 1 2 3 4
Tab.3 N.O.
300 Vac Faston
No flow rate 70 VA 0,5 A 6,3 mm.
DIN plug protection IP65 On request The DIN cap is supplied in a separate kit
KIT
INSTALLATION AND MAINTENANCE Drain the hydraulic circuit before installation. Do not mount the
switch in direct contact with ferromagnetic surfaces.
Proceed with the assembly, taking care to use only a hexagonal wrench for fixing metal fittings.
In case of electrical failure replace the electrical head making sure of the happened hooking bayonet.
NOMENCLATURE
FCM 3 ●
2,5
15 GV
● ● KIT/FCM We reserve the right to change the data without notice
Tab.2 Tab.2 Tab.1 Tab.3
Name + N. of setting Nominal setting l/min Process connection + Type of installation
DIN cap optional mounting kit BE#040/8-03/2010
153
常见问题
关于Valco品牌Valco FCM Flow Switch产品的常见问题。Imtek Engineering随时准备帮助您在United States采购Valco的Valco FCM Flow Switch。
Imtek Engineering通过可信赖的供应渠道采购正品Valco产品，并以具有竞争力的价格向United States客户提供。
